Isolation flange and bracketed pump modules offer a convenient method of mounting a circulator for chilled water and heating applications. These modules can be used for adding a pump to an existing flow center to increase head capacity, on the load side or between the heat pump and buffer tank of a hydronic system, on a primary/secondary system, or on the ground loop side of a geothermal system where the flush valves are located separately from the pumps. The double, three-, and four- pump modules are configured in a “push-pull” arrangement so the pumps are in series. The photos below are representative of the series and the table shows the extensive offering.
Features:
- Isolation valves or companion flanges included (depends on model)
- Factory assembled and leak tested (isolation valve models only)
- Choice of Grundfos circulators (115V or 208-230V)
- Powder-coated galvanized steel mounting brackets
- All components easily serviceable
- Quiet and reliable operation
** Submittals will open in a new tab
| PN | Pump(s) | Connection | Photo |
|---|---|---|---|
| 1037 | UPS26-99 | Iso Valve, 1" FPT | Coming soon |
| 1057 | UP26-116 | Iso Valve, 1" FPT |  |
| 1089 | UP26-116SF | Iso Valve, 1" FPT | Coming soon |
| 1069 | UPS26-99 115V | Iso Valve, 1" FPT | Coming soon |
| 9102-4F | UPS26-99 115V | 1" FPT (No Valves) |  |
| 1038 | UPS26-99 (2) | Iso Valve, 1" FPT | Coming soon |
| 1058 | UP26-116 (2) | Iso Valve, 1" FPT |  |
| 1090 | UP26-116SF (2) | Iso Valve, 1" FPT | Coming soon |
| 1047 | UPS26-99 115V (2) | Iso Valve, 1" FPT | Coming soon |
| 1045 | UPS26-99 (3) | Iso Valve, 1" FPT | Coming soon |
| 1061 | UP26-116 (3) | Iso Valve, 1" FPT |  |
| 1091 | UP26-116SF (3) | Iso Valve, 1" FPT | Coming soon |
| 1070 | UPS26-99 115V (3) | Iso Valve, 1" FPT | Coming soon |
| 1046 | UPS26-99 (4) | Iso Valve, 1" FPT | Coming soon |
| 1062 | UP26-116 (4) | Iso Valve, 1" FPT |  |
| 1092 | UP26-116SF (4) | Iso Valve, 1" FPT | Coming soon |
| 1071 | UPS26-99 115V (4) | Iso Valve, 1" FPT | Coming soon |
These powder-coated, galvanized steel pump mounting brackets provide a convenient way to mount UP/UPS15 and UP/UPS26 series flanged pumps.
| PN | Description | Photo |
|---|---|---|
| 3817 | Pump mounting bracket for UP/UPS 15 & 26 pumps, double pump |  |
| 4244 | Pump mounting bracket for UP/UPS 15 & 26 pumps, single pump |  |
| 4358 | Pump Mounting Bracket, HV Flanges (fits Grundfos GF40/43, Magna3 40 Series and Wilo Maxo 1.25 Series) |  |