GEO-FLO :: FLOW CENTERS

NP Non-Pressurized

FAQs | NP Series Pump Curves | Submittals

The new NP Series non-pressurized flow center raises the bar for non-pressurized applications. Building upon Geo-Flo’s 3-way flushing valves with Flo-Link connections, the NP Series reduces installation time, and increases reliability. In fact, by incorporating flushing valves into the flow center, the ground loop may be flushed without adding external flush ports, saving installation time and additional cost. Plus, piping becomes much simpler. Pump selection for the new NP Series is the ultimate in flexibility. Geo-Flo is the first to use the redesigned Grundfos UPS26-99 3-speed pump. Or, the new variable speed Magna GEO may be selected for even more operating costs savings. Current options are as follows:

  •  Grundfos UPS26-99 or UP26-116
  •  Two UPS26-99 or UP26-116 pumps
  •  Variable speed Magna GEO
  •  One Magna GEO and one UPS26-99

The NP Series has many installation/service-friendly features. One of the best is the GEO-METER flow tool. For even more flexibility, an adapter is available to use this tool with the competition’s flow center, providing a “one tool fits all” solution.

 

Variable speed pumping with direct flow rate control or delta-T control is available with models and

 

  

NP Series Installation (Hose Kit)

NP Series Installation

(PVC - Inside Header)

   

NP Series
System Flushing

 

In the typical application, flushing can be accomplished by simply attaching the flush cart hoses directly to the flow center. The optional bypass valves are needed when the loop header is installed in the mechanical room. However, if the loop header is outside, the bypass valves are not necessary, creating an extremely clean piping arrangement.

Pump replacement is greatly simplied with the 3-way valves. The top left and bottom valves may be rotated to isolate the pump(s). Water level is easily accessible from the top of the flow center via the specially-designed pressure relief cap. All connections to the flow center include Geo-Flo’s Flo-Link double O-ring fittings, providing reliable hand-tightened union connections.

Welcome to the next generation of non-pressurized flow centers!